Shri Hingulaj Marketing

Key Specifications & Features

Brand/Series: Orbit – “Express Modular” series.

Current rating: 10 A.

Circuit type: 2-Way switch — i.e., allows controlling a load (such as a light) from two different locations.

Module size: 2 Module width (2 M) in the modular plate system for the part referenced (code 1421) from the listing.

Colour / finish: White finish is indicated in the listing.

Mounting format: Modular switch design – means it fits into a modular frame/plate system with appropriate backing box or module plate.

Usage note: Suitable for switching circuits from two different points (for example in corridors, staircases, large rooms) rather than just simple one-point ON/OFF.

---

Typical Use & Considerations

Use it when you have a lighting circuit (or other load) that you want to control from two different switch locations, such as a corridor light with switches at both ends, a staircase landing, or a large room with multiple entry points. The 2-Way feature makes it suitable for such scenarios.

Being 10 A rated, it is suitable for standard lighting loads or moderate fan loads in residential/commercial settings — good for typical household wiring rather than very heavy appliance circuits.

Since it’s a 2-Module width device, you’ll need a compatible 2-M plate and modular frame of the same system (Orbit modular plates) so that it fits flush and looks uniform.

In a place such as Chennai / Tamil Nadu, where finishes and wiring aesthetics matter, choosing a modular switch of a known brand helps maintain uniformity, upgradeability and looks.

---

Things to Verify / Before Purchase & Installation

Confirm the module width you need: this is for a 2 M (two-module) switch—if your panel or frame is single-module (1 M) or triple-module (3 M) you might need a different variant.

Check that you need a 2-Way switch: If the circuit only needs one-point control (just one switch), a 1-Way variant would suffice and might be more cost-effective.

Check the load: 10 A rating is fine for lighting/fan circuits, but if you are controlling a heavy load (e.g., high wattage lights, multiple fans, large motor) you may need higher current rating (16 A, 20 A) for safety and durability.

Compatibility with the plate/frame system: Ensure the switch fits the modular plate system you're using (matching brand or compatible mounting pattern) so it sits flush and aligns properly.

Installation quality: As always with switches, ensure correct wiring (proper earth/neutral if required), secure terminals, no loose connections, and that the switch is mounted level and the frame/plate is well aligned. Poor installation will affect appearance and longevity.

Finish & appearance: Since this is a visible accessory, ensure the finish (white) matches other nearby switches/plates for visual uniformity in your interior.

Buy from authorised distributor: To ensure genuine product, correct build quality, safety certification and warranty support, especially for recognised brand like Orbit.

---

Summary

The Orbit Express Modular 10 A 2-Way Switch (2 M) is a good quality modular electrical accessory suitable for applications where you need dual-location control of a lighting circuit (or similar moderate load). It offers a known brand, modular format, 10 A rating and compatibility with modular wiring systems. It’s well suited for typical residential/commercial use.

Key Specifications & Features
Brand / Series: Orbit Switch India Pvt Ltd — from their Express Modular series.
Current rating: 20 A, making it suitable for higher-current circuits than typical lighting switches.
Number of ways: 2‑Way — allows control of a single load (e.g. a light) from two different locations.
Module size / Variants:
1‑Module (1 M): e.g. part no 1413 for rocker type.
Premium variant: 1‑Module part no 1408.
Flat rocker: 1‑Module flat version “1411‑E” / similar. [Orbit Express Modular 20 A Flat 2‑Way Switch]()
2‑Module: There is also a 2 M variant. [Orbit Express Modular 20 A 2‑Way Switch (2M)]()
Colour / Finish: Most common is White for these modular switches.
Physical Dimensions: According to Orbit’s listing, the 1 M versions are approximately 5 cm × 4 cm × 2 cm.
Design & Build:
High-impact, fire-retardant polycarbonate body (typical for Orbit modular switches).
Modular rocker mechanism, engineered for reliability under repeated use.
Manufacturer: Orbit Switch India Pvt Ltd, based in Vasai (Maharashtra).
---
Typical Use & Applications
Lighting or Power Circuits: Ideal for circuits where you want to switch a load from two locations — for example: hallway lights, staircase lights, or a room with two entrances.
Higher Load Uses: Given the 20 A rating, it can handle heavier loads compared to a standard 10 A switch — potentially useful for high-power lighting, motor loads, or appliances (depending on wiring).
Modular Systems: Fits into modular face-plates & frame systems, making it a good choice when building or expanding a modular switchboard.
Commercial / Residential: Useful in both residential and commercial setups where robust switching is needed with control from multiple points.
---
Things to Verify / Before Buying & Installing
1. Load Compatibility: Make sure the circuit you’re controlling is appropriate for a 20 A switch. If the load is low (e.g. small LED lights), a lower-rated switch might suffice.
2. Module Size Match: Confirm whether you need 1 M or 2 M version based on your plate/frame layout.
3. Back‑Box and Wiring: Your wall box and wiring must support the current; use appropriate wire gauge and ensure secure connections.
4. Indicator Option: If you want a switch with an indicator (LED or neon), check if that variant is available.
5. Installation Quality: Proper installation (leveling, wiring, earthing) is critical, especially for a 20 A switch.
6. Genuine Product: Buy from authorised / reputed sellers to ensure genuine Orbit parts and avoid fakes.
7. Environment: In humid/coastal regions (like Chennai/Tamil Nadu), ensure the device is mounted in a way that reduces moisture ingress or corrosion risk.
---
Summary
The Orbit 20 A 2‑Way Express Modular Switch is a heavy-duty, modular switch designed for circuits where you need control from two points.
Multiple variants exist (1M, 2M, flat, premium), giving flexibility depending on your switchboard layout.
It’s well-suited for lighting, power loads, or motor circuits, but needs proper wiring and installation to leverage its 20 A rating safely.

Key Specifications & Features
Rated current: 10 A (10 AX) at ~240 V AC for the standard version.
Switch type: 2-Way meaning the same lighting circuit (or load) can be controlled from two different switch points.
Model/Part No: 21022 is the commonly referenced code for this variant.
Module size: 1 Module (“1M”) version for wall plate mounting.
Colour/Finish: White finish is typical for this variant.
Material & Build: Made from good quality polycarbonate/thermoset plastic. The catalogue mentions “thermosetting plastic” for similar series.
Compliance & Standards: The product listing states “Standards: ISI” which indicates it conforms to Indian Standards.

---
Typical Use-Cases & Considerations
This switch is ideal when you want to control a light or load from two locations — for example at both ends of a corridor, staircase lighting from top and bottom, or in larger rooms with two entrances.
Since it’s rated for 10 A, it’s suited for standard lighting/fan circuits or moderate loads — not heavy loads (motors, large AC units) unless the wiring and load are verified.
Because it’s from the Anchor Roma series (a well-known Indian brand) you’ll likely find matching plates/frames and spare parts easily.
In humid/coastal locations (such as Chennai) ensure proper installation: back-box depth, correct wiring, good termination, and that the modular frame/plate is properly sealed to prevent dust/ingress.
Ensure the wiring for two way switching is correctly done: you’ll have two switches wired appropriately (common feed, two travellers) so both locations can act. Use a qualified electrician if unsure.

---
Things to Check / Before Buying
Confirm module size: Although the listing I'm citing is 1 Module, ensure your wall plate and gang supports the module size.
Confirm part number: The 21022 is common, but variants (colours, finishes, antimicrobial coating) may have different codes.
Confirm finish: If you have other switches of a particular finish (white gloss, cream, antique, etc), pick a matching one for aesthetic consistency.
Confirm load rating: Make sure 10A is sufficient for your circuit. If you’re controlling heavy loads, you may need a 16A or 20A variant.
Check that the wiring is correct for 2-way operation: The switch needs proper wiring (common feed, two way legs) for two-location control. If your wiring only supports one location, a 1-way switch would suffice.
Ensure you buy from an authorised dealer to guarantee genuine product, warranty, and correct build.
Inspect installation: Ensure the switch is properly seated in the plate/frame, terminals are tight, wires of correct gauge, and no signs of heating or loosening over time.

---
Summary
The Anchor Roma 10 A 2-Way Switch (model 21022) is a solid, budget-friendly modular switch option when you need two-location control for lighting or moderate loads in Indian homes or offices. Good brand, decent build, modular compatibility — with the usual cautions about correct wiring, load matching and installation quality.

A 1-Module Bell Push Switch is a simple electrical pushbutton switch used to operate a doorbell or chime. It is designed to be mounted in a modular electrical switchboard and connects to a bell/chime circuit. These switches are compact (1M standard size) and typically made from durable plastic.
ONECUBE

Key Specifications & Features
Rated current: 20 A at approximately 240 V AC.
Type: 2-Way — meaning you can control the same load (e.g., light circuit) from two different locations.
Module size / format: Commonly listed as 1-module (for many Anchor Roma variants) though ensure compatibility with your plate/gang size.
Material: Polycarbonate or high quality plastic body. Example listing: “Material: Polycarbonate”.
Finish: White (common variant) though other finishes may exist in the Roma line.
Standards & usage: Listed as “ISI standard” and suitable for residential, commercial and hospitality use.
Built-in protection features: Example listing mentions “IP20 protection with captive screws”, “spark shield”, “maximum contact pressure”, “quick make and break”.
---
Typical Use-Cases & Considerations
Because it’s rated at 20 A and supports 2-way switching, this is especially useful when you need two-location control of a lighting circuit (for example: both ends of a corridor, stair-cases, large rooms with two entrances) and the load might be somewhat heavier (multiple lights/fans, or a circuit requiring more head-room).
The higher rating (20 A) means you have a margin compared to standard 10 A switches — friendly in cases where loads are larger or you want future-proofing.
As part of the Anchor Roma range, the aesthetic and modular compatibility are good: you can match with other switches, plates in your house/office installation for a uniform look.
For installations in Chennai / coastal/humid climates: ensure that the back-box depth is adequate, screws/terminals are tight, insulation is good, and the plate/cover is well-sealed to avoid corrosion or looseness over time.
Installation note: Because it’s 2-way, ensure wiring is correct (i.e., common + two travellers or whatever your wiring standard) — otherwise the 2-way feature won’t operate correctly. If your wiring only supports 1-way, you might not utilise the full capability of this switch.
Match the finish and module size with your existing switchboard/plates so it appears seamless.
---
Things to Verify / Before Purchase
Make sure the module size and plate/gang size match your wall board (many listings note 1 module, but depending on the version you might need 2 module).
Confirm the exact model / part number (e.g., 21088 is one referenced for “20A 2-Way Switch” in white) and variant finish/colour.
Confirm that the load requirement of the circuit warrants a 20 A switch. If the circuit is light (just a few bulbs), a 10 A switch may suffice — using overspec might not cause issues but cost and space considerations matter.
Ensure the wiring and protective devices (cables, MCBs/fuse) upstream match the 20 A rating, so you’re not installing a 20 A switch on a circuit with undersized cable which can lead to hazards.
Verify product is genuine Anchor Roma (check packaging, hologram/label, dealer authenticity) to ensure warranty and quality.
If you eventually want an indicator (neon/LED) version, check if such a variant exists in the 20 A 2-way line (sometimes there are “with indicator” versions).
For coastal/humid environment: ensure install location is well-protected from moisture, and that plates/switches are maintained cleaned/tightened over.